Additional Info

More Details

Features
* A sculpted foam trochanter bucket to reduce pressure and increase stability

Application
* The EquaGel General and EquaGel Straight Comfort models are designed for users with mild to moderate pressure relief needs
* The EquaGel Protector and Adjustable Protector are intended for users with moderate to high pressure relief needs

Cover
Toss It Cover
* The top fabric of the Toss-It is 80% cotton and 20% polyester for absorbency with a Poly Urethane backing for waterproofing and breathability
* The bottom fabric is a standard non-slip stitch bond.
* The top fabric of the Toss-It is able to absorb as much as 8 ounces of liquid in approximately 4 minutes. The polyurethane backing prevents liquid from seeping through the cover but with microscopic holes, allows for heat and air to freely pass through
* Stretch fabric to retain pressure relieving function
* Zip closure
* When fitting the cover, make sure the fuzzy side is over the top of the cushion as this is the absorbent and stretchy side of the Toss-It.

Sizes
16"x16", 16"x18", 16"x20", 18"x16, 18"x18",18"x20", 20"x16", 20"x18

Place Of Manufacture

Utah, United States of America.

Price Guide

Price is from Mobility HQ

Models And Options

Models

Available in four different models in a range of sizes

General EquaGel
* The General is 1 .75 inches of EquaGel with a 0.75" trochanter bucket sculpted in for stability and comfort

Straight Comfort EquaGel
* 2 inches of EquaGel
* Flat and rotatable

Protector EquaGel
* 2 inches of EquaGel with a 1" trochanter bucket sculpted in for stability and comfort followed by a 0.5" stability foam base

Adjustable Protector EquaGel
* The top half of the cushion - the comfort layer - has two options to fit the individual needs and to adjust the needed protection. One has a sculpted trochanter bucket 0.25" deep for extra cushioning and the second top layer has a deeper bucket 0.75" for comfort and added stability

Dimensions

Additional Dimensions

EquaGel (in general)
Width Overall..................................... 410, 460 or 510 mm
Depth Overall..................................... 410, 460 or 510 mm

EquaGel Adjustable Protector
Height Overall.................................... 63.5 mm
Weight Overall (kg)............................... 2.8 kg (Based on 460x410mm size)
Load Capacity (supplier stated)................... 160 kg

EquaGel General
Height Overall.................................... 44.45 mm
Weight Overall (kg)............................... 1.36 kg (Based on 460x410mm size)
Load Capacity (supplier stated)................... 125 kg

EquaGel Protector
Height Overall.................................... 63.5 mm
Weight Overall (kg)............................... 2 kg (Based on 460x410mm size)
Load Capacity (supplier stated)................... 147 kg

EquaGel Straight Comfort
Height Overall.................................... 50.8 mm
Weight Overall (kg)............................... 2.56 kg (Based on 460x410mm size)
Load Capacity (supplier stated)................... 160 kg

Setup And Maintenance

Maintenance

Refer to the User Manual or supplier for specific details.

Cleaning
* EquaGelTM is non-allergenic and can be washed by spraying the gel with water
* For further sanitation treatments, soaps and disinfectants do not harm the gel
* All EquaPressure cushions will be made either without any components but the gel or with equally easily laundered covers

Requirements

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.