More Details

The system consists of a portable pump unit, a pressure reducing underlay and a top layer of air cells made from plastic (polyurethane).

Structure
* The mattress consists of 30 single air chambers
* Individual air cells can be removed if punctured, for repair or replacement
* These air cells sit on top of an under layer with the whole system being only 180mm deep. This low profile assists with transfers and does not interfere with the use of side rails
* The plastic (polyurethane) under layer is independently encased in a waterproof, vapour permeable cover
* The top layer of air cells comprises 16 individual cells that are arranged in four groups, each of four cells. Each of the cells cyclically inflate and deflate one at a time in each group, continually supporting the body on at least 75% of the mattress surface while the pressure on 25% of the body is relieved. The cycle time is 15 minutes
* The cells are designed to be narrower at their centre, and wider at the mattress edge. This ensures that the smaller, lighter occupants occupy the softer centre part of the overlay as well as providing some resistance to the occupant rolling off the overlay. In addition the mattress can be profiled using adjustable straps
* A double bed mattress is available, providing a supportive foam section for use by the occupants partner

Talley B.A.S.E Sequential Cushion
* This cushion can be attached directly into either side of the head end. This allows the occupant to be transferred between the cushion and the bed without the need to swap hoses

Cover
* The cover is removable, two way stretch, breathable, (vapour permeable) waterproof and fire retardant
* Both the under layer and the air cells have separate covers
* The cover is non allergenic, highly resistant to soaps and detergents, and are fully washable for effective decontamination

Attachment
* The mattress sits directly onto the bed base

Pump / Controls
* The separate, portable alternating pressure pump features an on / off switch and a manually operated pressure control dial which sets the required level of air pressure according to the user's weight
* The pump operates by supplying air on demand only, when the mattress requires it, reducing power consumption and extending service life
* The pump can be hung on the bed by adjustable hanging brackets or stood on the floor

Safety Features
* Visual and audible operation status, such as a low air pressure warning alarm, and fault indicators on the pump
* CPR release situated at the side of the overlay for rapid deflation

Method Of Use

* Sits directly on the existing bed base
* The air pressure can be selected and controlled according to user's weight

Considerations

All pressure reduction products must be monitored to prevent 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony parts are pressed against the surface below the cushion or mattress. Where bottoming out occurs even with correct use (eg. correct inflation levels), a different product may need to be considered.

The mattress can be punctured.

Specific inflation levels are critical (see manufacturer's instructions).

Place Of Manufacture

Romsey, Hampshire, England

Price Guide

May also be available for hire

Models

* Single bed mattress
* Double bed mattress consisting of single Talley Quattro Plus Mattress with a foam section for a partner

Maintenance

* Check the mattress daily for punctures or air loss
* The cover can be machine washed and line dried (in the shade) or tumble dried on cool
* The cells can be separated from the base for cleaning purposes

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.