More Details

The system consists of a portable pump unit and a mattress overlay made from plastic (polyurethane) that sits on top of an existing mattress.

Structure
* The overlay consists of 17 single air chambers
* Individual air cells can be removed if punctured, for repair or replacement
* Each of the cells cyclically inflate and deflate one at a time in each group, continually supporting the body on at least 75% of the mattress surface while the pressure on 25% of the body is relieved. The cycle time is 15 minutes
* The cells are designed to be narrower at their centre, and wider at the mattress edge. This ensures that the smaller, lighter occupants occupy the softer centre part of the overlay as well as providing some resistance to the occupant rolling off the overlay. In addition the overlay can be profiled using adjustable straps
* A double bed mattress is also available, providing a supportive foam section for use by the occupants partner

Talley B.A.S.E. Sequential cushion
* This cushion can be directly connected into either side of the overlay head end
* This allows the occupant to be transferred between the cushion and the overlay without the need to swap hoses

Cover
* The cover lies over the top of the overlay and attaches to the overlay with press studs
* The cover is two way stretch, vapour permeable, waterproof and fire retardant
* The cover is non allergenic, highly resistant to soaps and detergents, and fully washable for effective decontamination

Attachment
* The overlay sits directly on the existing mattress and is attached via tuck in flaps

Pump / Controls
* The separate, portable alternating pressure pump features an on / off switch and a manually operated pressure control dial which sets the required level of air pressure according to the user's weight
* The pump operates by supplying air on demand only, when the mattress requires it, reducing power consumption and extending service life
* The pump can be hung on the bed by adjustable hanging brackets or stood on the floor
* Transport facility allows unpowered support of the user for up to four hours

Safety Features
* Visual and audible operation status, such as a low air pressure warning alarm, and fault indicators on the pump
* CPR release situated at the side of the overlay for rapid deflation

Method Of Use

* The air pressure can be selected and controlled according to user's weight

Considerations

All pressure reduction products must be monitored to prevent 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony parts are pressed against the surface below the cushion or mattress. Where bottoming out occurs even with correct use (eg correct inflation levels), a different product may need to be considered.

The overlay can be punctured.

Specific inflation levels are critical (see manufacturer's instructions).

Place Of Manufacture

Romsey, Hampshire, England.

Price Guide

Price is from ILS Kogarah
Also available for hire

Models

* Single bed mattress
* Double bed mattress overlay consisting of single Talley Quattro Overlay with a foam section for a partner

Maintenance

* Check the overlay daily for punctures or air loss

Cleaning
* To clean the cover it can be machine washed and line dried (in the shade) or tumble dried on cool
* The cells can be separated from the base for decontamination

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.