Skip to Content
Login/Sign-Up Donate Contact Us
 
  Search

Assistive Technology Australia

Endless Possibilities for All

  • Home
  • Who We Are
  • What We Do
  • Product Search
  • Assistive Technology
  • Access
  • Training
  • Publications
  • Home
  • Who We Are
  • What We Do
  • Product Search
  • Assistive Technology
  • Access
  • Training
  • Publications

Product Detail

at magic logosubscribers   Login 
Send an email to make an enquiryEnquiry
PrintPrint
Hycomp Bilby Stander

Haycomp Bilby Stander

A battery operated, lightweight standing hoist designed to lift a person from a sitting position into a supported standing position for transfer. Operated by a hand held electric control. Suitable for domestic and commercial use.

Learn More 
Features: Mobile, Falls Prevention

Options

Slings
Two slings are available for use with this hoist
* An underarm single band sling of foam to be used when weight is taken through the lower limbs and feet are supported on the foot plate Or
*...

  Hycomp Bilby Stander
Image Gallery: Hycomp Bilby Stander

Contact the suppliers for pricing and availability

(3 suppliers)

For information contact AT Aust on 1300 452 679

  • Additional info
  • Models and options
  • Dimensions
  • Setup and maintenance
  • Requirements

More Details

Materials
The hoist is made from epoxy coated stainless steel

Mast
Features a single mast, angled slightly backwards

Base
* Base is U shaped
* Legs are electrically operated via push buttons on the hand held controller

Boom
* The lifting boom incorporates two attachment pieces for a sling
* The boom provides an arc-shaped lift
* Two angled handles for the user to grip with their hands

Castors
* Four swivel castors
* Step on lockable castors at the rear

Push Handle
Rectangular push handle located on upper half of the mast at rear

Footplates
* Two rectangular footplates are situated at the base of the mast
* Each footplate has slip-restant material to assist in foot placement

Knee Pad
* A deep vinyl covered foam knee pad stops feet from sliding forward during the lift
* The knee pad is mounted at the base of the mast in front of the actuator
* A leg strap is for securing the knee against the pad is available

Sling
A chest sling attaches to points on the boom and supports the torso of the user during the transfer

Power Source
* Supplied through a 24 volt rechargeable battery
* The battery is attached at the lower half of the mast
* The battery needs to be lifted out and connected to a separate battery charger

Method Of Use

Method of operation
* The user is raised and lowered using push buttons located on a hand held control
* The control is on an extendable cord
* This machine can lift to an upright position on the foot plates
* The user must have some ability to weight bear
* Legs of the base are electrically operated

Place Of Manufacture

Australia

Price Guide

Price use to be $4500 (awaiting reply from manufacturer to update pricing)

More Details

Materials
The hoist is made from epoxy coated stainless steel

Mast
Features a single mast, angled slightly backwards

Base
* Base is U shaped
* Legs are electrically operated via push buttons on the hand held controller

Boom
* The lifting boom incorporates two attachment pieces for a sling
* The boom provides an arc-shaped lift
* Two angled handles for the user to grip with their hands

Castors
* Four swivel castors
* Step on lockable castors at the rear

Push Handle
Rectangular push handle located on upper half of the mast at rear

Footplates
* Two rectangular footplates are situated at the base of the mast
* Each footplate has slip-restant material to assist in foot placement

Knee Pad
* A deep vinyl covered foam knee pad stops feet from sliding forward during the lift
* The knee pad is mounted at the base of the mast in front of the actuator
* A leg strap is for securing the knee against the pad is available

Sling
A chest sling attaches to points on the boom and supports the torso of the user during the transfer

Power Source
* Supplied through a 24 volt rechargeable battery
* The battery is attached at the lower half of the mast
* The battery needs to be lifted out and connected to a separate battery charger

Method Of Use

Method of operation
* The user is raised and lowered using push buttons located on a hand held control
* The control is on an extendable cord
* This machine can lift to an upright position on the foot plates
* The user must have some ability to weight bear
* Legs of the base are electrically operated

Place Of Manufacture

Australia

Price Guide

Price use to be $4500 (awaiting reply from manufacturer to update pricing)

Models

Only one model available

Options

Slings
Two slings are available for use with this hoist
* An underarm single band sling of foam to be used when weight is taken through the lower limbs and feet are supported on the foot plate Or
* A full support sling with extensions that fit under the legs and are attached to the spreader bar to offer more support from the hoist and less weight is required to be taken through the lower limbs and feet

Specification Standard
Base Height (clearance) Unknown
Base Length 1000 mm
Base Width Maximum (int measurement open) Unknown
Base Width Minimum (ext measurement closed) Unknown
Height Unknown
Load Capacity (supplier stated) 175 kg

Additional Dimensions

Width of Base.....................650mm
Height of Base....................140mm (with 100mm castors)
Weight Overall....................43kg

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.

Disclaimer

Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre New South Wales (ILCNSW), operating as Assistive Technology Australia, is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILCNSW (Assistive Technology Australia) for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.

Suppliers

Supplier Location Contact Website
AIS Healthcare Pty Ltd Bayswater, VIC, Australia Sales: 03 9729 9399
Fax: 03 9720 5776
  Visit Website 
Haycomp (manufacturer) Bayswater, VIC, Australia Sales: 03 9729 9399
Fax: 03 9720 5776
  Visit Website 
Medical Industries Australia Lane Cove, NSW, Australia Sales: 02 9490 6200
Fax: 02 9490 6298
  Visit Website 

Similar Products

  • 44122000
    Arjo Maxi Move Mobile Hoist
  • 44322000
    Panda Mobile Pool Lift
  • 44232008
    Molift Quick Raiser 205
  • 44232005
    Guldmann GLS5 Active Lifter
Loading...
Ref 44:23:005
ISO 12.36.04
  • Contact
  • Donate
  • Virtual Tour
  • Disclaimer
  • Terms
  • Privacy
  • Home
  • Login/Sign-Up
  • Site Help
  • Feedback
  • Copyright & Disclaimer
  • Terms of Use
  • Privacy Policy
  • Who We Are
  • News & Events
  • Our History
  • Meet Our Team
  • Become a Member
  • Donate
  • Useful Links
  • What We Do
  • Client Services
  • Access
  • Training
  • @magic
  • AT Collaboration
  • Research
  • Assistive Technology
  • Browse Products
  • Product Search
  • 2nd-Hand Register
  • Suppliers Directory
  • @magic
  • Access
  • Access Consultancy
  • Access Training
  • Access Projects
  • Training
  • Publications
  • Strategic Plan
  • Annual Reports
  • Journal Extracts
  • @ a Glance Guides
  • Contact Us

Address

Assistive Technology Australia
(Independent Living Centre NSW)
Shop 4019 Westpoint Blacktown
17 Patrick Street
Blacktown
NSW 2148
Australia

Find Us

Shop 4019
Level 4 (Rooftop)
Westpoint Shopping Centre Blacktown
Enter car park via express ramp at the Alpha St roundabout (Map)

1300 452 679
02 9912 5800 (Reception)

02 8814 9656 (Fax)

Email: welcome@at-aust.org
Feedback:feedback@at-aust.org

Facebook: ILCNSW

ABN 44103 681 572

 

Copyright © 2009-2020 Independent Living Centre NSW trading as Assistive Technology Australia. Logo and name are trademarks of the Independent Living Centre NSW.