More Details

Finish
Rectangular tubular steel frame is white powder coated

Angle and type of mast
* Single
* Angled slightly rearwards

Point of battery attachment on mast
Middle third of mast

Shape of base
Extra wide U shaped base

Angle and type of boom
Single, angled boom

Plane / arc of lift
Arced

Castors
Four castors, the two rear are lockable

Spreader Bar
* Four point spreader bar, designed for use with the Boomer bariatric slings
* Padding on cross piece of spreader bar

No. of attachment points
* Four points of attachment
* Hook fittings

Push Handle
* Closed rectangle that extends the full width of the base to allow use by two operators
* Horizontal section of push handle is located within the top third of the mast

Method of operation
* Raise and Lower - powered
* Hand held push button control with extendable cord
* Opening Legs of Base - powered
* Hand held push button control with extendable cord

Controls
Method of Operation
Hand held control for lifting, lowering and leg adjustment

Battery
* Attaches to the rear of the mast
* Emergency stop button
* Separate battery charger

Power source
* The battery housing is attached to the base of the mast
* The 24 volt battery is lifted out to be charged and connected to the battery charger
* This requires the hoist to be stored with access to a power point
* An audible warning signal is activated during use when the battery charge is reduced to 50% of capacity

Battery Recharging
The battery is connected to an off-board battery charger and then to a power source

Dismantling
This hoist does not dismantle

Slings
Haycomp manufacture a range of slings (see separate product description 'Haycomp Slings'

Considerations

It is recommended that prior to using this product, training in manual handling and the correct use of assistive devices should be undertaken.

Place Of Manufacture

Victoria, Australia

Price Guide

Call supplier for pricing
Price on application from Haycomp

Models

Only one model is available

Options

Weighing device (scales)

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.