More Details

FRAME
Long wheel base.
Epoxy coated steel frame.
Fibreglass and aluminium body work with Perspex windows.
Reinforced for increased strength.
Spring and strut suspension.
Carpet on ABS plastic base.
The front window has a vent deigned to blow air when the scooter is moving.
The lockable side windows slide open and closed.

SEAT
Embossed leatherette upholstery is washable and water resistant.
The seat is padded and contoured.
Alternative seat height post.
Seat levers can be fit on the left or right side.

BACKREST
Padded and contoured with embossed leatherette (synthetic vinyl) upholstery.
Adjustable backrest angle (reclining), which can also fold forward to seat level.
. Seat also slides forwards / backwards

ARMRESTS
As standard, are built into the doors.
Optional armrests can be attached for when the doors are removed.

WHEELS
330 x 100mm pneumatic, wide profile, rubber tyres are standard.

CONTROLS
Use programmable, proportional Penny and Giles controllers.
Finger control levers that may be used with the thumb on the delta style tiller.
Lever controls can be left or right hand operated.
Speed selection knob.
Battery indicator.
Headlights.
Tail lights.
Indicators.
Horn.

BATTERIES
50amp/hr sealed gel batteries.
A separate charger is used and connects under the front bonnet

CHARGER
Off board 4amp

MOTOR
Direct drive
Has a motor disengagement lever at the rear base

COLOURS
Red

BRAKES
Electromagnetic brakes

Considerations

Transport Accessibility

The space allowed on public transport for carrying mobility equipment is an area of 1300mm by 800mm.
Overall length of this scooter ...........1600 mm
Overall width of this scooter ........... 790 mm

State transit will only carry scooters with an unladen weight of less than 200 kg and which can be driven onto the bus, and manoeuvred to fit wholly within the designated wheelchair space under their own power. Any such scooters carried must also comply where relevant with the rules applying to wheelchairs.

Three wheeled mobility aids of any kind are unstable in normal bus operations and will not be carried because of the safety risk.

Accessible buses display a blue and white wheelchair sign on the front of the bus, and on the easy access door.

Factors applying to all scooters
* This item should be trialled in the user's own environment to ensure maximum safety and independence. Environmental considerations include eg: kerbs, footpaths, tram and railway crossings, street crossings, etc
* Users should take care when riding a scooter or powered wheelchair and observe the following safety guidelines:
* Users who intend to use scooters or powered wheelchairs must ensure they have the necessary physical and cognitive skills to operate and manoeuvre them safely
* Stay within the legal speed limit of 10km/h
* Be aware that taking medication or driving under the influence of alcohol may affect the user's judgement
* Always make sure that you are clearly visible, particularly at night or on dull days-use the lights and reflectors and install a reflective flag high enough to be seen by motorists
* Wear a bicycle helmet whenever possible
* Slow down when you are near other people, especially pedestrians and cyclists
* Avoid stopping or driving on inclines greater than your scooter is designed for
* Use footpaths if possible. If there are no foot paths, plan to user quieter roads
* Plan your trip and avoid uneven surfaces, dips and potholes
* Ensure if you are carrying parcels that the load will not over-balance your scooter and the parcels do not interfere with your controls or vision

Place Of Manufacture

Taiwan

Price Guide

Price is from Active Mobility Systems

Models

Only one model is available

Options

Smaller batteries than standard.
Armrests for when the doors are removed.
Puncture resistant tyres.
Tyre sealant.

Additional Dimensions

Turning radius 1780mm
Weight of cabin 48kg

Maintenance

All scooters require regular maintenance. Refer to User Manual for specific details.

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.

Licence & Insurance Requirements

In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.

Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the State Insurance Regulatory Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.