Additional Info

More Details

May be suitable for bariatric use up to the specified weight limit of 170 kg.
Can be installed as a one piece or two piece unit

Controls
The fully waterproof floating hand control contains a lightweight battery and has large, blue concave and convex operating buttons as well as a battery level indicator and a charger. Suction cups attach the hand control to the wall or side of the bath.

Battery
Rechargeable by disconnecting the hand control and plugging it into the power supply. Takes approx 4 hours to charge. One full charge enables approx 15 lifts (depending on user weight)

Covers
Soft gel covers fit over the seat and backrest.

Safety Features
. Attaches to the base of the bath with easy release, counter balanced suction feet,
.The automatic system will not allow a person to be lowered unless there is sufficient battery charge to raise them again

Dismantling
Folding. Can be dismantled to two parts

Accessories
Side flap diverters come free of charge with every bathlift, and are to be used if there are handles on the bath. Hook the diverter over the handles, and this will guide the side flaps pass the handle to the top of the bath

Place Of Manufacture

South Korea

Models And Options

Models

Only one model is available

Options

. Swivel Slide - Used to facilitate transfers. The swivel slide is a round attachment that connects in the centre of the seat. It slides between the centre of the seat and the side of the bath.
. Pommel - This padded nub stands 10mm high and attaches to the centre of the seat to keep the user from sliding forward. Designed for paediatric use, but can also be used for older individuals with similar needs.
. Headrest - Attaches to the top rear of the chair to give head support
. Chest Harness - This gel belt strap with plastic locking mechanism supports the user around the chest.
. Lap Harness - This gel belt strap helps support user around the lower waist to provide additional support
Wingbacks - Can be purchased individually (left or right), or as a pair. Provides additional support on the sides to keep user from tipping to the side

Dimensions

Additional Dimensions

Height.................................... 1069 mm
Weight (kg) NSW................................... 8.64 kg (5 kg backrest)
Backrest Height NSW............................... 604 mm
Backrest Width.................................... 340 mm

Requirements

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.