More Details

MATERIALS
High density polyurethane foam

COVER
Outer removable cover made from 100% texturised polyester nylon fabric. The fabric is treated to assist with rot resistance and to be impervious to fungal attack. Cover has a zipper.

APPLICATION
It is designed to tilt the pelvis forward and relieve stress on the lower back. It helps maintain a normal lumbar curve when sitting. Suitable for office chairs, cars and all forms of transport.

NOTE
The wedge can add up to 90mm of height to the user. It is therefore important to ensure there is sufficient head room when used in closed spaces.

CLEANING
Remove outer cover and hand wash in warm water using a mild detergent. Do not bleach, tumble dry or dry clean. Hang to air dry in a well ventilated area.

Considerations

All cushions must be monitored to prevent 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony parts are pressed against the surface below the cushion. Where bottoming out occurs even with correct use (eg correct choice and depth of foam, correct inflation level) , a different product may need to be considered.

Ensure that the item is not accidentally placed upside down or back to front

It is advisable that a health professional be consulted when considering a suitable pressure care product.

Foam must be regularly replaced as it losses its spring and becomes hard after long term use

Place Of Manufacture

Turkey

Price Guide

Check the BodyAssist website for dealers

Models

Only one model is available

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.