More Details

FRAME
This scooter has an epoxy coated steel frame, moulded plastic cowlings, rubber protection strip at the front of the base and carpeted matting on the foot platform.

SEAT
. Seat swivel lever is located underneath the front (right hand side) of the seat base and allows the seat to swivel through 180 degrees, locking at 0, 45 and 90 degrees.
. Seat height is adjustable by releasing the seat swivel lever and turning the seat to a non locked position and lifting it off. Then removing the pin and large grip screw located in the seat post. Seat height is changed and seat replaced.
. A sliding seat mechanism, activated by turning a lever under the front of the seat, allows the driver to alter seat position while seated.
. Armrests pivot up and down and are width adjustable.
. Different seat sizes are available.

STEERING COLUMN
can be tilt adjusted to three positions and is controlled via a plastic coated handle at the base of the steering column.

FRONT WHEELS
260mm pneumatic tyres

REAR WHEELS
260mm pneumatic tyres

FREEWHEELING
The scooter can be free wheeled by lifting a lever located at the rear of the base.

BATTERY CHARGING
is achieved by connecting the scooter to a separate charger and then to a mains power point. The charger point is located at the top of the steering column.

BATTERIES
are stored in separate boxes with carry straps under the seat. The scooter is powered by two 28 amp wet batteries which are housed under the seat.

FOOTREST
is a flat platform between the steering column and battery cover. The platform beside the steering column (on either side) is angled upwards.

CONTROLS
Delta tiller with finger operated acceleration and reverse controls (proportional speed controls). Includes a key for turning the scooter on and off. The LED meter indicates the amount of proportional charge left in the batteries. The controller also features a dial to select from a range of 10 speed settings; push button horn and lights; and an battery LED battery level indicator.

BRAKES
are electromagnetic

Considerations

Transport Accessibility
The space allowed on public transport for carrying mobility equipment is an area of 1300mm by 800mm.
Overall length of this scooter ...........1150 mm
Overall width of this scooter ........... 600 mm

State transit will only carry scooters with an unladen weight of less than 200 kg and which can be driven onto the bus, and manoeuvred to fit wholly within the designated wheelchair space under their own power. Any such scooters carried must also comply where relevant with the rules applying to wheelchairs.

Three wheeled mobility aids of any kind are unstable in normal bus operations and will not be carried because of the safety risk.

Accessible buses display a blue and white wheelchair sign on the front of the bus, and on the easy access door.

Factors applying to all scooters
* This item should be trialled in the user's own environment to ensure maximum safety and independence. Environmental considerations include eg: kerbs, footpaths, tram and railway crossings, street crossings, etc
* Users should take care when riding a scooter or powered wheelchair and observe the following safety guidelines:
* Users who intend to use scooters or powered wheelchairs must ensure they have the necessary physical and cognitive skills to operate and manoeuvre them safely
* Stay within the legal speed limit of 10km/h
* Be aware that taking medication or driving under the influence of alcohol may affect the user's judgement
* Always make sure that you are clearly visible, particularly at night or on dull days-use the lights and reflectors and install a reflective flag high enough to be seen by motorists
* Wear a bicycle helmet whenever possible
* Slow down when you are near other people, especially pedestrians and cyclists
* Avoid stopping or driving on inclines greater than your scooter is designed for
* Use footpaths if possible. If there are no foot paths, plan to user quieter roads
* Plan your trip and avoid uneven surfaces, dips and potholes
* Ensure if you are carrying parcels that the load will not over-balance your scooter and the parcels do not interfere with your controls or vision

Place Of Manufacture

Taiwan

Price Guide

Price is from Active Mobility Systems

Models

Three models available (check separate items):
* 778ER
* 778HD
* 778SL

Options

Baskets
- seat and rear pole mount

Rear Mounted
- golf bag holder
- crutches holder
- walking frame holder
- oxygen cylinder holder
- trailer with lockable lid

General Accessories
- walking stick clips
- sun canopy
- tarp cover for storage

Maintenance

Refer to supplier / manufacturer manual for maintenance details and safety warnings.

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.

Licence & Insurance Requirements

Registration requirements
In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.

Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the State Insurance Regulatory Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.