More Details

Frame
* Chrome steel with dual axle positions, single on Super-Hemi frame
* On 510mm and 560mm models, frames have a steel cross brace and are reinforced for strength
* Other models have an aluminium cross brace

Upholstery
* Black nylon, flame retardant, bacteria resistant

Seat
* Width: 360 - 560 mm
* Depth: 410 - 460 mm

Back
* 10 degrees bend in frame
* Adjusts from 380mm - 480mm in 25mm increments
* Optional reclining back
* The reclining backrest is not available on the Super-Hemi frame

Armrests
* Padded
* Flip up and removable
* Space saver feature - slot in behind backrest

Legrests
* Swingaway removable
* Also available as elevating and Smartleg articulating (legrest automatically extends as it is elevating)
* Flip up metal foot plates

Wheels
* Black composite mag 610mm rear wheels with low profile urethane tyres
* Chrome plated handrims

Castors
* 200mm composite / urethane

Warranty
* Lifetime on frame and cross braces

Considerations

Wheelchair Restraints
When transporting a person in a wheelchair in a car or van, both the occupant and the wheelchair require an RMS (formerly RTA) approved restraint system. The wheelchair and the occupant need to be separately secured to the vehicle itself.
RMS approval is not required for a postural support, such as a harness, that supports the user in the wheelchair but is not part of the vehicle restraint system.
The use of a headrest is not legally required but strongly recommended. Easily detachable, folding headrests which fit a wheelchair with standard push handles are available. Refer to section Wheelchair, Scooter, Cushions, ramps / Postural Supports - Seating System: Restraint+ Head+Back+Seats.

Place Of Manufacture

INVACARE (USA)

Models

* Available with an amputee attachment or as a one arm drive model

Options

* Armrests
* Castors
* Tyres
* Wheels
* Handrims
* Legrests
* Footplate
* Seat Restraints
* Backs
* Seat
* Wheellocks
* Amputee attachment
* Adjustable rear anti-tippers
* Quick release axles
* Front anti-tippers
* Telescopic IV rod
* Oxygen holder assembly

Additional Dimensions

Standard
Length NSW........................................ 1092 mm
Width NSW......................................... 635 mm
Seat Height NSW................................... 440 or 495 mm
Folded Length..................................... 285 mm
Wheel Diameter (Rear)............................. 610 mm
Castor Diameter................................... 200 mm

Super-Hemi
Length NSW........................................ 1092 mm
Width NSW......................................... 635 mm
Seat Height NSW................................... 370 mm
Wheel Diameter (Rear)............................. 560 mm
Castor Diameter................................... 150 mm

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html