More Details

* Double function stainless steel handrails
* Automated platform and safety bars
* Folding seat for conversion to chair lift (load capacity 100 kgs)
* Vandal resistant; controls concealed by folded platform, each landing features a wall mounted key pad, each key pad has a key to enable the buttons, safety arms that fold away within in the platform
* Can travel up to 30 metres (further available by request)
* Up to five landing
* Can enter/exit the lift from up to three sides
* One person capacity
* Sensor button with large emergency stop button
* The lift can be controlled via Andriod App: Bluetooth will allow the lift to be controlled by smartphone or tablet
* The bluetooth receiver can be retrofitted on existing Ascendor lifts

Method Of Use

Fetch the lift
* A push of the button will fetch the lift up to your floor. The safety bars and side mounted loading ramps open automatically.

Opening the lift
* You can automatically open and close the platform with the remote control.

Get on board
* Roll onto the platform with your wheelchair.

Safe Journey
* Place your finger on the sensor button. The safety bars will be lowered and the ramps are raised automatically. The lift gently sets off in motion.

Place Of Manufacture

Austria

Models

Two models available:

* PLG7 Designed for Straight Staircases
* PLK8 Designed for Curved Staircases

Options

* Curved or straight lifts available

Additional Dimensions

Speed ..................... 6.6/min
Inclination ................ 0-47 degr
Stairwidth ................ 850 mm
Power supply .......... 1x 230v/10A power point
Door clearance ....... Allow for 1550 mm clearance in front of loading ramp

Installation

See online manual for installation.

In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee of $65 is charged for a lift installed in a public place. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).

It is recommended that the lift be inspected annually by a competant person. WorkCover requires payment for registration as well as an annual fee.

Request further details from the supplier or contact WorkCover Plant Registration Unit.

It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.