More Details

The LOOP has a growing seat shell undercarriage
* Frame width 40mm
* Back part extendable by 60mm
* Seat wedge adjustable by 50mm in depth

Standard Version
* Rigid aluminum frame with 10cm abduction
* +2 or +4 seat width growth
* Back rest angle is adjustable and foldable to the front
* Back part is extendable by 60mm back, seat wedge adjustable in depth by 50mm
* Standard 300mm rear wheel with integrated hand rims, drum brakes and quick release axle with pneumatic or flat free tyres
* Caster wheels with aluminum forks

FRAME
* Aluminum frame
* Outdoor Front end (adjustable in width and length, can assist with rough or soft surfaces)

BACKREST
* Backrest angle can be adjustable mechanically through the frame from 90 to 120 degr and folded forwards

ARM RESTS
* Mounted at the seat shell
* Adjustable in height through the raster or step less adjustable in height and angle

WHEELS
* Standard wheels
* Wheel cover - black synthetic material (not applicable for smallest wheel diameter)
* Push bow - mounting standard or mounting high

HANDRIMS
* Stainless steel hand rims that can be mounted, tight, wide, high or standard

TYRES
* Schwalbe or standard tyres

LEGRESTS
* Standard leg rests locking at 90 degr with heel edge

FOOTPLATE
*All footplates swivel outwards and removable, footplate depth of 160mm.
Can be fitted undivided footplate with foldable sidewards and removable leg support and adjustable width. Divided footplates or swiveling divided footplates (adjustable 241.3cm to 444.5cm in pivot point).

BRAKES
* Standard drum brakes with lever for attendant

BRAKE LEVER EXTENSIONS
* Models: Cover, ball knob or golf ball knob, 60mm straight in length or 120mm cranked in length

SPOKE COVER
* Standard Extra is transparent, but can also be blue, red or yellow

CASTER WHEELS
* Standard polyurethane grey tyre

CASTER FORKS
* Aluminium fork, black anodised

Considerations

Wheelchair Restraints:
* When transporting a person in a wheelchair in a car or van, both the occupant and the wheelchair require a Roads and Maritime Services (RMS) approved restraint system. The wheelchair and the occupant need to be separately secured to the vehicle itself.

* RMS approval is not required for a postural support, such as a harness that supports the user in the wheelchair but is not part of the vehicle restraint system.

* The use of a headrest is not legally required but strongly recommended. Easily detachable, folding headrests which fit a wheelchair with standard push handles are available. Contact the supplier or refer to section Wheelchair, Scooter, Cushions, ramps
Postural Supports - Seating System: Restraint, Head, Back, Seats

Place Of Manufacture

Motum
Western Australia

Models

Three models are available:
* Model Loop Size 1: Size 1 Loop TIS rigid manual wheelchair
* Model Loop Size 2: Size 2 Loop TIS rigid manual wheelchair
* Model Loop Size 3: Size 3 Loop TIS rigid manual wheelchair

Options

* Anti-tipper swing away
* Splash guard
* Schwalbe pneumatic tyre colours
* Heel cups - specific size for frame ordered: calf support, angle adjustable and multidirectional
* Knee lever brake

Additional Dimensions

Model Loop Size 1: Size 1 Loop TIS rigid manual wheelchair
* Diameter of Castor 12.5, 14.0, 15.0, or 18.0 mm (4 sizes)
* Diameter of Rear Wheel 30.0, 50.0, 55.0, or 60.0 mm (4 rear wheel sizes.)
* Camber of Wheels 2 degrees
* Height of Handle 900 mm - 1200 mm (standard mounting of the push bow)
* Height of Handle 1000 mm - 1300 mm (high mounting of the push bow)

Model Loop Size 2: Size 2 Loop TIS rigid manual wheelchair
* Diameter of Castor 12.5, 14.0, 15.0, or 18.0 mm (4 sizes)
* Diameter of Rear Wheel 30.0, 50.0, 55.0, or 60.0 mm (4 rear wheel sizes.)
* Camber of Wheels 2 degrees
* Height of Handle 900 mm - 1200 mm (standard mounting of the push bow)
* Height of Handle 1000 mm - 1300 mm (high mounting of the push bow)

Model Loop Size 3: Size 3 Loop TIS rigid manual wheelchair
* Diameter of Castor 12.5, 14.0, 15.0, or 18.0 mm (4 sizes)
* Diameter of Rear Wheel 30.0, 50.0, 55.0, or 60.0 mm (4 rear wheel sizes.)
* Camber of Wheels 2 degrees
* Height of Handle 900 mm - 1200 mm (standard mounting of the push bow)
* Height of Handle 1000 mm - 1300 mm (high mounting of the push bow)

Maintenance

All wheelchairs require regular maintenance. Refer to User Manual for specific details

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.