Skip to Content
Login/Sign-Up Donate Contact Us
 
  Search

Assistive Technology Australia

Endless Possibilities for All

  • Home
  • Who We Are
  • What We Do
  • Product Search
  • Assistive Technology
  • Access
  • Training
  • Publications
  • Home
  • Who We Are
  • What We Do
  • Product Search
  • Assistive Technology
  • Access
  • Training
  • Publications

Product Detail

at magic logosubscribers   Login 
Send an email to make an enquiryEnquiry
PrintPrint
Picture

TheraSeat Semi Zone Accessory Kit

The TheraSeat Semi Zone Accessory Kit enables a compatible alternating system to be adjusted into a seated position of 80 degrees with full support and therapy under the users sacrum. It overcomes the drawback of many alternating systems where the cells under the user's sacrum collapse and bottom out when the user's upper body is raised beyond 25 degrees. It can be fitted to any compatible 130mm overlay or 200mm mattress replacement system in the Theraflow range (except Theraflow 3).

Learn More 
Features: Alternating Air, Inflatable
  Picture
Image Gallery: Picture Picture

Contact the supplier for pricing and availability

(1 supplier)

For information contact AT Aust on 1300 452 679

  • Additional info
  • Models and options
  • Dimensions
  • Setup and maintenance
  • Requirements

More Details

* The TheraSeat SemiZone system is compatible with all alternating overlays and mattresses in the Theraflow range except for the Theraflow3 Overlay. It is suitable for Theraflow 5 (overlay) and Theraflow 8 (mattress replacement) models

* When installed, the TheraSeat injects the air pressure directly under the user's sacrum where most of the body weight is located rather than through the foot end.

* Special restriction valves prevent the air pressure transferring to the head and foot end resulting in a zone of high support pressure in the middle where it is needed the most.

Motor
* The compressor motor is upgraded in the Theraflow5 and Theraflow8 from 10 litres per minute to 18 litres per minute. The air hoses in the centre section of the mattress are reinforced with marine grade stainless steel springs to prevent any hose kinking at high angles of elevation.

Cover
* In the Theraflow8, the patented coverlet is replaced with a version featuring vertical support straps to prevent cells in the sacral region from falling over under the increased patient weight.

Kit contains
* Upgraded Control Unit with increased output from 10 to18 litres per minute.
* Upgraded Coverlet with cell stabilisation straps.
* Extra Hosing to inject air under sacral region
* Restriction valves to create a zone of support pressure under the sacrum.
* Spring Loaded Air Hoses to prevent kinking in sacral region

Considerations

All pressure reduction products must be monitored to prevent 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony parts are pressed against the surface below the cushion or mattress. Where bottoming out occurs even with correct use (eg correct inflation levels), a different product may need to be considered.

It is advisable that a health professional be consulted when considering a suitable pressure care product.

Place Of Manufacture

Unknown

Price Guide

Order code SZONE-004

More Details

* The TheraSeat SemiZone system is compatible with all alternating overlays and mattresses in the Theraflow range except for the Theraflow3 Overlay. It is suitable for Theraflow 5 (overlay) and Theraflow 8 (mattress replacement) models

* When installed, the TheraSeat injects the air pressure directly under the user's sacrum where most of the body weight is located rather than through the foot end.

* Special restriction valves prevent the air pressure transferring to the head and foot end resulting in a zone of high support pressure in the middle where it is needed the most.

Motor
* The compressor motor is upgraded in the Theraflow5 and Theraflow8 from 10 litres per minute to 18 litres per minute. The air hoses in the centre section of the mattress are reinforced with marine grade stainless steel springs to prevent any hose kinking at high angles of elevation.

Cover
* In the Theraflow8, the patented coverlet is replaced with a version featuring vertical support straps to prevent cells in the sacral region from falling over under the increased patient weight.

Kit contains
* Upgraded Control Unit with increased output from 10 to18 litres per minute.
* Upgraded Coverlet with cell stabilisation straps.
* Extra Hosing to inject air under sacral region
* Restriction valves to create a zone of support pressure under the sacrum.
* Spring Loaded Air Hoses to prevent kinking in sacral region

Considerations

All pressure reduction products must be monitored to prevent 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony parts are pressed against the surface below the cushion or mattress. Where bottoming out occurs even with correct use (eg correct inflation levels), a different product may need to be considered.

It is advisable that a health professional be consulted when considering a suitable pressure care product.

Place Of Manufacture

Unknown

Price Guide

Order code SZONE-004

Models

* Only one model available
* Suitable for Theraflow 5 (overlay) and Theraflow 8 (mattress replacement) models

Specification Standard
Height Unknown
Length Unknown
Load Capacity (supplier stated) Unknown
Weight (kg) Unknown
Width Unknown

Maintenance

Follow the manufacturer's instructions for cleaning and maintenance.

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.

Disclaimer

Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre New South Wales (ILCNSW), operating as Assistive Technology Australia, is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILCNSW (Assistive Technology Australia) for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.

Suppliers

Supplier Location Contact Website
Patient Support Systems Pty Ltd Belrose, NSW, Australia Sales: 1800 432 247
Fax: 02 9844 5445
Toll Free: 1800 432 247
  Visit Website 

Similar Products

  • 21142000
    Alternating Air Overlay Mattress For Single Bed
  • 21142015
    Oska Alto Series 3 - V4
  • 21142003
    Aspire Range of Active Air Alternating Overlays
  • 21172010
    Aspire Lifecomfort Hybrid Mattress System
Loading...
Ref 21:14:2022
ISO 04.33.06
  • Contact
  • Donate
  • Virtual Tour
  • Disclaimer
  • Terms
  • Privacy
  • Home
  • Login/Sign-Up
  • Site Help
  • Feedback
  • Copyright & Disclaimer
  • Terms of Use
  • Privacy Policy
  • Who We Are
  • News & Events
  • Our History
  • Meet Our Team
  • Become a Member
  • Donate
  • Useful Links
  • What We Do
  • Client Services
  • Access
  • Training
  • @magic
  • AT Collaboration
  • Research
  • Assistive Technology
  • Browse Products
  • Product Search
  • 2nd-Hand Register
  • Suppliers Directory
  • @magic
  • Access
  • Access Consultancy
  • Access Training
  • Access Projects
  • Training
  • Publications
  • Strategic Plan
  • Annual Reports
  • Journal Extracts
  • @ a Glance Guides
  • Contact Us

Address

Assistive Technology Australia
(Independent Living Centre NSW)
Shop 4019 Westpoint Blacktown
17 Patrick Street
Blacktown
NSW 2148
Australia

Find Us

Shop 4019
Level 4 (Rooftop)
Westpoint Shopping Centre Blacktown
Enter car park via express ramp at the Alpha St roundabout (Map)

1300 452 679
02 9912 5800 (Reception)

02 8814 9656 (Fax)

Email: welcome@at-aust.org
Feedback:feedback@at-aust.org

Facebook: ILCNSW

ABN 44103 681 572

 

Copyright © 2009-2020 Independent Living Centre NSW trading as Assistive Technology Australia. Logo and name are trademarks of the Independent Living Centre NSW.