More Details

Frame
* Aluminium, lightweight, folding, self propelling
* Growth frame with provision for 50mm (2") of growth in the crossbrace and 75mm (3") in the seat rail
* XLOCK folding crossbrace fully locks when unfolded, creating a level of performance comparable to a rigid frame wheelchair.
* One-step push-to-lock and pull-to-fold functions can be operated with just one hand.
* Highly adjustable and modular frame that allows easy installation of seating systems and positioning devices
* Height adjustable stroller handle
* 27 frame colours and 24 crossbrace colours can be chosen separately to create over 600 colour combinations
* Frame options include one arm drive, transit, approved tie down points

Seat
* Slung style
* Depth adjustable
* Height adjustable
* Width adjustable
* Option of not to have a seat (a large range of seating systems can be fitted)

Backrest
* Standard or dynamic backrest options
* Tension adjustable backrest upholstery
* Choice of integral or folding push handles. The folding push handles are available with a height adjustable back.

Armrests
* Not standard

Armrest options
* T-Post X-Tall (w/ Sideguard)
* T-Post 2X-Tall (w/ Sideguard)
* Flip-Up
* Adjustable Locking Flip Up
* Length Adjustable Locking Flip-Up

Legrests and Footplates
* Highly adjustable footrests for both length and angle (Z-finity system)
* Interchangeable hangar angles and optional footplate extension
* Swing away legrests or fixed front end with flip up footplates

The Z-finity System's footplate can be adjusted between 5" above the seat pan to 21" below the seat pan to provide proper support as your child grows. Its rotating hardware allows for infinite adjustment of the footrest angle and placement to achieve optimal positioning of the feet, ankles, and knees.

Z-finity is available with both of the X'Cape's front frame options - Swing-in/Swing-out and Fixed. Choose Swing-in/Swing-out hangers for aid in transfers and pulling up close to cabinets and counters. Choose Fixed hangers for the lightest weight configuration and an active style.

Wheels
I* Several wheel, tyre and push rims options available
* Wheels options include Mag, Mag 5 Spoke, Lite Spoke. Ultra Lightweight Spoke, Spinergy SPOX and Spinergy LX
* Tyre options include full or low polyurethane, High Pressure Clincher, Performance Poly, Knobby V-TRAK, Pneumatic, Schwalbe Marathon Plus Evolution, Schwalbe Speed Run
* Wheel rim options include black plastic coated, Spinergy Flex Rim and Natural Fit options

Castors
* Several front castor options including 3"or 4" Micro Lighted castors, 4: or 5" Low Profile Polyurethane, 4" x 1.5" or 5"x 1.5" Aluminum Soft Roll, 5" x 1.5" or 6"x 1.5"Semi-Pneumatic, 5" Soft Roll (Grey), 6" Polyurthane
* Carbotecture Fork or Frog Legs Suspension Fork

Brakes
Optional wheel locks
* High Mount Pull
* High Mount Push
* Compact (Scissor)

Considerations

Wheelchair Restraints
When transporting a person in a wheelchair in a car or van, both the occupant and the wheelchair require a Roads and Maritime Services (RMS) approved restraint system. The wheelchair and the occupant need to be separately secured to the vehicle itself.
RMS approval is not required for a postural support, such as a harness that supports the user in the wheelchair but is not part of the vehicle restraint system.
The use of a headrest is not legally required but strongly recommended. Easily detachable, folding headrests which fit a wheelchair with standard push handles are available. Contact the supplier or refer to section Wheelchair, Scooter, Cushions, ramps / Postural Supports - Seating System: Restraint+Head+Back+Seats

Place Of Manufacture

Quickie Wheelchairs, USA

Price Guide

Price is from Sunrise Medical QLD
additional options available

Models

Available in self propelled, transit and one arm drive models

Options

* Front frame and footplate options
* Frame and crossbrace colours
* One arm drive
* Transit (attendant propelled)
* Wheel and castor options
* Wheel lock options
* Armrest options
* Plastic side guards
* Tension adjustable backrest upholstery
* Positioning belts
* Upper extremity support tray
* Seat pouch
* Front and rear anti tippers
* Back pack
* Caddy
* Crutch holder
* Tool kit

Additional Dimensions

Width Overall 375.0 mm to 675.0 mm (Depending on configuration)
Height of Seat from Ground 330.0 mm to 480.0 mm (Depending on configuration)
Angle of Backrest 8.0 degrees to 24 degrees
Angle of Legrest Hanger 80 degrees (Footrest depth/angle adjustment can angle feet 70 to 90 degrees)
Camber of Wheels 0 and 3 degrees (3 degrees standard)
Climbing Grade (angle) 10.0 degrees (6 degrees side slope)
Diameter of Rail 1.0 inch (Versarail (25.4mm))
Diameter of Base 22.0 mm (7/8 inch - bottom tube)
Diameter of Castor 3.0, 4.0, 5.0, or 6.0 inch (76mm, 102mm, 127mm, 152mm)
Diameter of Rear Wheel 12.0, 16.0, 20.0, 22.0, or 24.0 inch (305mm, 406mm, 508mm, 559mm, 610mm)

Maintenance

All wheelchairs require regular maintenance. Refer to user manual for specific details.

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.