Return to product page

If your browser's Print dialog does not automatically appear, go to the File menu and select Print to print this product.

You can adjust the size of the printed text with the following buttons.


Bed to Stand Helping Hand

Bed To Stand

Contact the supplier for pricing and availability

(1 supplier)

For information contact AT Aust on 1300 452 679

Short Description

This device is designed to assist a person in bed from a lying to a standing position. It consists of a steel frame with two connected swivel armrests. A flip up vertical bed pole is attached to the armrest nearest the head of the bed. The steel frame slides between the mattress and bed base. Each armrest extends above the side of the bed by lifting and swiveling into position. The armrests are then lowered after the transfer is complete. The bed pole section provides assistance from lying to sitting. The device can be used on either side of the bed. Three widths are available.

Additional Info

More Details

* The Bed to Stand Helping Hand has been load tested to 150 kg and is TGA approved
* The device is suitable for ensemble beds and beds with appropriate support under the mattress. It is not suitable for wired (electric) or water beds.
* It can be used either side of the bed. The smaller handle (bed pole section) can be installed on the left or right larger handle depending on which side of the bed is used. It connected to the larger handle using a spring loaded pin mechanism.
* The curved larger handles have a rubber grip.

Dimensions
Width Overall 620, 700, or 825 mm (three widths available)

Method Of Use

* When the user is lying on the bed, the smaller straight handle can be pulled into the upright position and locked into place. This is used as a lever for the user to pull themselves from a lying to a sitting position.
* Once in the sitting position, the smaller straight handle can be left upright or rotated downwards.
* The two larger curved handles (on each side of the user) can be pulled up and locked into place in order to support the user and help them into a standing position.
* When not in use, the handles can be rotated and slid into the down position out of the way and next to the mattress. They will not be visible when the bed is made.

Considerations

The Bed to Stand Helping Hand is not suitable for wired (electric) or water beds.

In certain circumstances there is an element of risk involved in the use of a device that attaches to the side of a bed such that there is the possibility of entrapment between the device and the mattress. This includes but is not limited to a bed pole (stick), bed rail or bed rail protector. The device may increase the risk of injury or even death to the bed occupant. Entrapment of limbs or body parts may occur with parts of the bed and the device. Some bed occupants may try to climb over a bed rail to get out of bed.

A risk assessment should be undertaken in each circumstance of use. The device should not be used in circumstances where there is a gap between the vertical components and the mattress. Users most at risk include those with physical or cognitive challenges or where the intended user's alertness is affected by medication.

Regular monitoring is recommended, particularly where the user's condition is changing.

Place Of Manufacture

Australia

Price Guide

$400 plus delivery cost
Deliver nationwide

Models And Options

Models

Only one model available

Requirements

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.

ARTG ID number for this product

Additional Images

With Self Help Pole Hand Grips Lowered

Suppliers

Tool Shop Engineering Pty Ltd
5 Barrabool Court
Toowoomba
QLD 4350
Australia
Sales: 07 4633 1866
Fax: 07 4633 1848
Contact Person: Lynette and Robert Weh
Website: https://toolshop.engineering

Disclaimer

Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre New South Wales (ILCNSW), operating as Assistive Technology Australia, is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILCNSW (Assistive Technology Australia) for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.