More Details

Frame
* This wheelchair has an epoxy coated steel frame and fibreglass casing.
* The frame has fittings for swing away foot plates.
* The wheelchair comes with three interchangeable coloured side panels in red, blue and silver.

Seat
* A Captain Style (car seat style) high back seat comes standard. The Captain seat is a foam contoured seat with a grey vinyl cover.
* The seat is height adjustable and can be removed from the wheel base.
* A seat belt is standard and is attached to the base of the arms.
* A rehab seat with power tilt or power lift is optional.

Backrest
* The backrest can be adjusted and can manually recline.
* The backrest folds forward for transportation.

Motor
* The wheelchair has two 0.8 Horse Power (HP) motors. It can drive up to approximately 35km on a full battery depending on the conditions.
* Freewheeling is possible by releasing levers that are situated behind the seat on both sides.

Battery
* It has an on-board charger.
* Battery Charging is achieved by connecting the charger provided to the mains power point and plugging it into the charging point at the front of the wheelchair on the right hand side of the base.

Controller
* A 50 Amp P&G VSI controller with four buttons is standard. The controller can be extended to the desired position and can be mounted on the left or right armrest. It is programmable and retractable and features flush on and off, and mode switches, proportional joy stick, battery charge indicator, horn and speed control.
* If the controller is moved to one armrest from the other the reset button must be activated before the chair will function.

Wheels
* The standard drive wheels are pneumatic.
* The middle drive wheels are 260mm in diameter by 85mm wide.
* The front and rear wheels are solid castors.
* The wheel base is not adjustable however the front castors are fitted with a flexible suspension joint.

Armrests
* The armrests are full length, contour moulded and lift up.
* They are height and width adjustable and removable.

Footplates
* The single, one piece footplate is mounted on the wheelbase unit and has adjustable height, length and angle.
* The footrest can fold up against the frame when not in use.
* Optional swing away footplates are available.

Legrests
* Optional elevating legrests and swing away legrests are available.

Brakes
* The brakes are electromagnetic.

Transport
* This chair cannot be transported with an occupant. It has tie down points for securing the wheelchair in a vehicle, however the user must not be sitting in the chair.
* Transporting the chair can be facilitated by dismantling the wheelchair into the seat unit, base unit, batteries and base unit cowling. The seat folds flat forward for transporting.

Option Details
* Flat free tyres (PU filled with the standard 4ply composite nylon mobility tyre)

Price Guide

Price is from ILS

Models

Shoprider Cougar 10 with power lift
Shoprider Cougar 14 is available which has a larger motor and larger drive wheel.

Options

* Rehab seat with power tilt
* Swing away leg supports
* Elevating leg rests
* Flat free tyres
* Attendant Control
* Stump supports
* Shopping bag carrier
* Sun canopy
* Oxygen bottle carrier
* Walking stick carrier
* Wheeled walker carrier
* Walking frame carrier
* High visibility flag
* Storage cover

Additional Dimensions

Standard
Width of Backrest...............................500 mm
Angle of Backrest................................From 9 degr to 31 degr
Length Overall..................................... 920 mm
Height Overall...................................... From 1120 mm to 1200 mm (1540 with power lift)
Weight Overall (kg)..............................100 kg
Speed (km/hr).......................................From 0 km/h to 8 km/h

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.