Return to product page

If your browser's Print dialog does not automatically appear, go to the File menu and select Print to print this product.

You can adjust the size of the printed text with the following buttons.

Arjo Enterprise 8000X Bed

Call supplier for a price

Confirm with the suppliers for pricing and availability

(6 suppliers)

For information contact AT Aust on 1300 452 679

Last updated: Apr 20 2022

Short Description

An electrically operated low height bed which lowers to 300mm from the ground. Designed for healthcare facility use. It features height, backrest, knee break, leg raise adjustment and Trendelenburg tilting. An optional audible alarm detects when the patient exits the bed. The bed has split folding safety side rails and is available in one size only.

Additional Info

More Details

* Bed extension / linen shelf
* Curved mattress platform
* Angle indicator
* Low interface pressure on pressure mapping
* Four section curved mattress platform: The lateral curve on the mattress platform mimics the shape of a person's back much more closely than a flat surface. This results in lower pressures in the middle of the patient's back, both when the bed is flat and through all profiles
* Integral bed extension with mattress retainer
* Full width bed stripper
* Under bed light
* Zero transfer gap

Headboard / Footboard
* Removable head and foot boards

The panel infill colours available for the head / foot board are:
* Pale blue
* Lilac
* Dark blue

Bio-Contour Profiling System
* When the Auto Contour button is pressed the mattress platform profiles using a unique patented combination of movements
* Powered height adjustment and profiling to tilt platform (Trendelenburg / Reverse Trendelenburg), raise backrest, form knee-break and adjust calf-section
* Automatic CPR adjustment and dual sided manual CPR levers
* Angle indicators for thigh and backrest

* Hand held control on lead and on board controls
* Single button controls with clear and simple icons. Single touch functions can be used for key functions, such as auto CPR, 3 degree backrest angle, auto contour, cardiac chair position, low height and extra low height, and Trendelenburg / reverse Trendelenburg positioning.
* Function lockouts to prevent unauthorised use

* Contact supplier regarding suitable mattresses

* Linked braking and steering system

Bed Rails
* The bed is supplied with split plastic safety rails with in built controls.

Power Source
* Mains powered
* Battery backup

* The bed does not dismantle

* Pressure area care
* Falls Prevention: A low height of 300mm
* Suitable for bariatric use
* Infection Control: Designed to be easy to clean and decontaminate.

Additional features
* Manoeuvrability: The bed weighs significantly less than other electric hospital profiling beds and easier to manoeuvre.

Option Details
* Optional anti-entrapment system: The anti-entrapment sensors detect an object/person underneath the bed. The bed will automatically stop lowering until the obstruction is removed reducing the risk of entrapment to the patient, staff or equipment.
* Selection of IV poles - two-hook, four-hook, straight, angled and heavy duty


In certain circumstances there is an element of risk involved in the use of a device that attaches to the side of a bed such that there is the possibility of entrapment between the device and the mattress. This includes but is not limited to a bed pole (stick), bed rail or bed rail protector. The device may increase the risk of injury or even death to the bed occupant. Entrapment of limbs or body parts may occur with parts of the bed and the device. Some bed occupants may try to climb over a bed rail to get out of bed.

A risk assessment should be undertaken in each circumstance of use. The device should not be used in circumstances where there is a gap between the vertical components and the mattress. Users most at risk include those with physical or cognitive challenges or where the intended user's alertness is affected by medication.

Regular monitoring is recommended, particularly where the user's condition is changing.

Place Of Manufacture


Price Guide

Contact supplier for price

Models And Options


There are three models available.

* Enterprise 5000X
* Enterprise 8000X
* Enterprise 9000X


* Head board attached to mattress platform
* X-ray translucent backrest and cassette carrier
* Head / foot panel locks
* Dual-sided urine bag rails
* 150 mm castors (single or twin wheel)
* Under-bed anti-entrapment system
* Short bed (shorter calf section)
* Bed exit alarm
* Single position lifting pole with adjustable strap
* Multi position lifting pole with adjustable strap
* Selection of IV poles
* Balkan beam fracture frame
* Small traction assembly
* Head end traction assembly
* Safety side pads
* Syringe pump holder
* Oxygen cylinder holder
* Drainage bottle holder
* Urine bottle holder
* Folding monitor shelf
* Foot end gap infill panels
* Service kit
* Transducer mounting pole
* ITU head panel
* Push bar for porters
* Extra pendant patient handset (factory fitted)
* Bedpan holder


Specification Enterprise 8000 Bed
Base Height (clearance) 180 mm
Height From 320 mm to 760 mm (with 125mm castors)
Length 2300 or 2420 mm
Load Capacity (supplier stated) 250 kg
Width 1030 mm

Additional Dimensions

Backrest length 850 mm
Seat length 215 mm
Calf length 560 mm
Thigh length 365 mm
Safe working load/Maximum patient weight 250 kg/185 kg
Head down tilt 12 degrees
Foot down tilt 12 degrees
Backrest angle 62 degrees
Backrest pause 30 degrees
Thigh angle 20 degrees
Calf angle 16 degrees



Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see

Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.

Additional Images

Profile 8000X 9000X


Arjo Australia Pty Ltd (prev ArjoHuntleigh) (H/O WA)
78 Forsyth St
WA 6163
Sales: 1800 072 040 (National Customer Care)
Fax: 1800 009 077
Contact Person: Adrian Male (gen mgr)
Toll Free: 1800 072 040 (National Customer Care)
Arjo Australia Pty Ltd (prev ArjoHuntleigh) (NSW)
Level 2, 4 Talavera Rd
Macquarie Park
NSW 2113
Sales: 1800 072 040 (National Customer Care)
Fax: 1800 009 077
Contact Person: David
Toll Free: 1800 072 040
Arjo Australia Pty Ltd (prev ArjoHuntleigh) (QLD)
Unit 1
205 Queensport Road North
QLD 4172
Sales: 1800 072 040 (National Customer Care)
Fax: 07 3390 6544
Toll Free: 1800 072 040
Arjo Australia Pty Ltd (prev ArjoHuntleigh) (SA)
489 South Rd
Regency Park
SA 5010
Sales: 1800 072 040 (National Customer Care)
Fax: 08 8363 1833
Toll Free: 1800 072 040 (National Customer Care)
Arjo Australia Pty Ltd (prev ArjoHuntleigh) (VIC)
10 / 1866 Princess Hwy
VIC 3168
Sales: 1800 072 040 (National Customer Care)
Fax: 1800 009 077
Toll Free: 1800 072 040 (National Customer Care)
MaxAbility Consultants
Sales: 0422 419 984


Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre New South Wales (ILCNSW), operating as Assistive Technology Australia, is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILCNSW (Assistive Technology Australia) for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.