More Details

Frame
* Bed extension / linen shelf
* Curved mattress platform
* Angle indicator
* Low interface pressure on pressure mapping
* Four section curved mattress platform: The lateral curve on the mattress platform mimics the shape of a person's back much more closely than a flat surface. This results in lower pressures in the middle of the patient's back, both when the bed is flat and through all profiles
* Integral bed extension with mattress retainer
* Full width bed stripper

Headboard / Footboard
* Removable head and foot boards

The panel infill colours available for the head / foot board are:
* Pale blue
* Lilac
* Dark blue

Adjustments
Bio-Contour Profiling System
* When the Auto Contour button is pressed the mattress platform profiles using a unique patented combination of movements
* Powered height adjustment and profiling to tilt platform (Trendelenburg / Reverse Trendelenburg), raise backrest, form knee-break and adjust calf-section
* Automatic CPR adjustment and dual sided manual CPR levers
* Angle indicators for thigh and backrest

Controls
* Hand held control on lead
* Single button controls with clear and simple icons. Single touch functions can be used for key functions, such as auto CPR, 3 degree backrest angle, auto contour, cardiac chair position, low height and extra low height, and Trendelenburg / reverse Trendelenburg positioning.
* Function lockouts to prevent unauthorised use

Mattress
* Contact supplier regarding suitable mattresses

Castors
* Linked braking and steering system

Bed Rails
* The bed can be supplied with or without 3/4 folding safety rails.

Power Source
* Mains powered
* Battery backup

Dismantling
* The bed does not dismantle

Applications
* Pressure area care
* Falls Prevention: A low height of 300mm
* Suitable for bariatric use
* Infection Control: Designed to be easy to clean and decontaminate.

Additional features
* Manoeuvrability: The bed weighs significantly less than other electric hospital profiling beds and easier to manoeuvre.
* Selection of IV poles - two-hook, four-hook, straight, angled and heavy duty

Considerations

In certain circumstances there is an element of risk involved in the use of a device that attaches to the side of a bed such that there is the possibility of entrapment between the device and the mattress. This includes but is not limited to a bed pole (stick), bed rail or bed rail protector. The device may increase the risk of injury or even death to the bed occupant. Entrapment of limbs or body parts may occur with parts of the bed and the device. Some bed occupants may try to climb over a bed rail to get out of bed.

A risk assessment should be undertaken in each circumstance of use. The device should not be used in circumstances where there is a gap between the vertical components and the mattress. Users most at risk include those with physical or cognitive challenges or where the intended user's alertness is affected by medication.

Regular monitoring is recommended, particularly where the user's condition is changing.

Place Of Manufacture

Unknown

Price Guide

Contact supplier for price

Models

Only one model available.

Options

* Height extensions for safety sides
* Head board attached to mattress platform
* X-ray translucent backrest and cassette carrier
* Head / foot panel locks
* Dual-sided urine bag rails
* 150 mm castors (single or twin wheel)
* Under-bed anti-entrapment system
* Short bed (shorter calf section)
* Nurse handset holder
* Single position lifting pole with adjustable strap
* Multi position lifting pole with adjustable strap
* Selection of IV poles
* Balkan beam fracture frame
* Small traction assembly
* Head end traction assembly
* Safety side pads
* Syringe pump holder
* Oxygen cylinder holder
* Drainage bottle holder
* Urine bottle holder
* Folding monitor shelf
* Service kit
* Transducer mounting pole
* ITU head panel
* Push bar for porters
* Extra pendant patient handset (factory fitted)
* Bedpan holder

Additional Dimensions

Backrest length 850 mm
Seat length 215 mm
Calf length 560 mm
Thigh length 365 mm
Safe working load/Maximum patient weight 250 kg/185 kg
Head down tilt 12 degrees
Foot down tilt 12 degrees
Backrest angle 62 degrees
Backrest pause 30 degrees
Thigh angle 20 degrees
Calf angle 16 degrees

Maintenance

Cleaning
* Designed to be easy to clean and decontaminate
* Steam cleaner compatible

Maintenance
* Service / Engineering: Designed for 'pit stop maintenance - open accessibility means all changes can be carried out in situ within a few minutes by one person.

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.