More Details

Frame
* A rigid frame wheelchair with a four point wheelchair transport kit included as standard

Ground Compensation - GC3 Technology:
* While riding over uneven surfaces, the hard movements and vibrations are controlled and not absorbed by the seat or user

Gravity Compensation - GC3 Technology:
* The unique suspension will distribute the weight over a large footprint and improve the stability

Gravity Control - GC3 Technology:
* The independent suspension stabilises the seat in downhill and uphill transitions to keep the user comfortable in their chair

Intelli-drive Technology:
* This steer correcting feature improves maneuverability at low speed and helps maintain a straight trajectory for non-proportional specialty controls or when in latch mode in indoor or outdoor environments.

Seat
* The wheelchair can comes with fully adjustable Eclipse Seat frame with adjustable seat width, depth and back angle
* Optional power tilt, recline (with mechanical shear reduction), power seat elevation and elevating legrests / footboard

Armrests
* A range of armrests are available including desk length or full length, height adjustable, lift up and reclining armrests
* Optional Arm troughs with hand supports

Legrest
* Available with swing away, manual elevating and articulating swing away legrests, powered elevating and articulating legrests and powered footboard that lowers to the ground for standing transfers

Footplates
* There is a range of options available including lift up, lift up with angle adjustable, heel loops and calf pads

Wheels
* Drive wheels are 355mm pneumatic cast wheels with optional insert
* Front casters are pneumatic with optional insert and come in 150mm or 207mm in diameter

Controls
* Penny and Giles electronics feature easy full programmability and trouble shooting. Can be integrated with infrared and bluetooth technology
* The wheelchair comes standard with a VR2 90 Amp drive, VR2 6-key hand control, R-net EL 90 Amp fully expandable controller and hand control for power seating and speciality controls. R-net 120 Amp fully expandable controller and hand control also available

Colours
* Black, Candy Red, Razzleberry, Burnt Orange, Red Pearl and Blue Pearl

Brakes
* Electromagnetic brakes

Considerations

Transport Accessibility
The space allowed on public transport for carrying mobility equipment is an area of 1300mm by 800mm.

Wheelchair spaces
All new Sydney buses feature special 'kneeling suspension' and a ramp to provide easy access for less mobile passengers.

There are spaces for two wheelchairs on the new buses. These will accommodate most manual and electric wheelchairs with maximum length 1250mm, maximum width 750mm, maximum turning circle1500mm and maximum weight 200kg.

For safety reasons, passengers in wheelchairs are advised to face the back of the bus, bracing their wheelchair against the side of the space, applying the brakes and securing the seat belt of the wheelchair.

Wheelchair accessible buses display a blue and white wheelchair sign on the front of the bus, and on the easy access door.

Occupied Wheelchair in a Car
A person sitting in a wheelchair within a car or van requires certification and RMS (formerly RTA) approval for the wheelchair and occupants restraint system where the wheelchair or occupant are restrained to the vehicle structure. RMS approval is not required for a postural support, such as a harness, that is only attached to the wheelchair and not to the vehicle.

Wheelchair Restraints
When transporting a person in a wheelchair in a car or van, both the occupant and the wheelchair require an RMS approved restraint system. The wheelchair and the occupant need to be separately secured to the vehicle itself.
RMS approval is not required for a postural support, such as a harness, that supports the user in the wheelchair but is not part of the vehicle restraint system.
The use of a headrest is not legally required but strongly recommended. Easily detachable, folding headrests which fit a wheelchair with standard push handles are available. Refer to section Wheelchair, Scooter, Cushions, ramps / Postural Supports - Seating System: Restraint+ Head+Back+Seats.

Place Of Manufacture

Canada

Price Guide

Price is from Sunrise Medical
Price starts from $11,995

Models

Only one model available

Options

Power seat options:
* Tilt
* Recline
* Elevating legrests
* Seat elevation

Postural supports:
* Headrests
* Lateral supports
* Hip and thigh supports

Seating options:
* ASAP - growth adjustable base
* Eclipse - growth adjustable base

Controls:
* R-Net EL 90 Amp expandable (standard)
* R-Net 120 Amp expandable (option)
* Attendant drive control

Specialty Driver control options:
* Sip n Puff system
* ASL head array package
* Switch it head array package
* Proportional mini joystick chin / lip control
* Proportional mini joystick for midline mount
* Proportional mini joystick for armrest mount
* Proportional RIM head control
(all speciality driver controls require Omni - enhanced display and digital interface box with infrared)

Joystick:
Mount options
* Swing away
* Fixed
* Centre mount swing away

Mount support
* Fixed height mount
* Adjustable height mount support

Hand mount
* Right
* Left

Handle
* Stick handle
* Ball handle
* Foam ball handle
* T-handle
* Goalpost

Switches
* Egg switch
* Micro light switch
* Mini-cup
* Buddy button switch
* CA5 5 Switch Adaptor

Assistive Driving Package:
* Intelli-Drive - increases tracking capabilities with enhanced traction and steering precision

Additional Dimensions

Standard
Angle of Backrest... 86, 90, 94, 98, 102, 106, 110, 114, 118 or 122 degr
Length Overall...... 1105 mm
Angle of Tilt....... From 0 degr to 50 degr

Maintenance

* All wheelchairs require regular maintenance. Refer to the User Manual or supplier for specific details

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.

Licence & Insurance Requirements

In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.

Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the State Insurance Regulatory Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.